/********************************************************/ /* »ªÈ𰲶¨Òå*/ /********************************************************/ //#define KAIERSI_905 // 988 //#define HUARUIAN_968A // 968+ //#define HUARUIAN_968J // 928 //#define HUARUIAN_1010_N101L6 //#define SASMSUNG_089PANEL //#define HUARUIAN_NIUMAN //jinsuo add for dvd display evd for huaruian niuman 20100402 /*********************************************************************************/ //#define AODELI_968 // CLAA090LB0ACW //#define KANGMEI_N101L6 // IR USE INCAR BLACK //#define DINISHI_100IFW1 // IR HUANA no use //#define XIAOBAWANG_BT101W01 // IR IS _TYPE_YINGKA_XBW //#define XIAOBAWANG_101PFW2B00 // at080 GPIO 968main 1086-2660key v1.0 20100603 _HSD100IFW1 // #define XIAOBAWANG_AT090 // AD 918 //#define DERUN_805_AT080 // at080 GPIO _LQ110Y3DG01 //#define DERUN_808_HSD100IFW1 // AD //#define DERUN_1012_SHARPLQ104 // AD KEYBA E11 #ifdef DERUN_1012_SHARPLQ104 // #define DERUN_SHARP104DGVW1 #endif //#define DERUN_1012_CLAA102CN // AD KEY AS 808 //#define ZHONGHENGHUIBO_100IFW1 // GPIO _HSD100IFW1 //#define ZHONGHENGHUIBO_9D // GPIO AT090 //#define YONGNAN_101PFW2B00 // GPIO _HSD100IFW1 //#define HUANA_100IFW1_1081 // GPIO _HSD100IFW1 //#define GUANWEI_AT090_902 // GPIO AT090 //cdf del for ir define //#define XINHUACE_AT090 // GPIO AT090 //#define XINHUACE_HSD100IFW1 // GPIO PD101D //#define TUOBU_AT090 // GPIO AT090 // #define HUANA_AT090 // ADC HN-980-2660-K01 V1.0 10-06-21 // GPIO HN-980-2660-K01 V1.0 10-07-05 // #define HUANA_AT090_768KEY // ADC 768-2660-KEYC-V2 20100129 // #define SANMU_AT090 // GPIO PD0916KEY #if defined(SANMU_AT090)||defined(HUANA_AT090_768KEY)||defined(XINHUACE_AT090)||defined(TUOBU_AT090)\ ||defined(HUANA_AT090)||defined(XIAOBAWANG_AT090)||defined(GUANWEI_AT090_902) #define INNOLUX_AT090 #endif #if defined(XINHUACE_AT090) ||defined(XINHUACE_AT090) #define DERUN_REMOTE //#define DRAW_SLIDER // jinsuo add 20100420 #endif #if defined(DERUN_805_AT080)||defined(DERUN_1012_CLAA102CN)||defined(DERUN_1012_SHARPLQ104)||defined(DERUN_808_HSD100IFW1) #define DERUN_REMOTE #define DRAW_SLIDER // jinsuo add 20100420 #define VOLUME_BAR_NO_SHOW_EXIT #endif #ifdef DERUN_1012_SHARPLQ104 #define PANEL_USE_UD_LR #endif /********************************************************/ #ifndef DERUN_REMOTE//TUOBU_AT090 DERUN_808_HSD100IFW1 #define LEFT_RIGHT_VOL_IN_ONE_KEY #endif /********************************************************/ #define DINISHI_CHANGESOURCE_DVD_TV_MUTE 1 //#define _BACKLIGHT_SUPPORT_USE_PWM4 // add 20100504 //#define PANEL_USE_UD_LR #define _CHANGE_SOURCE_POWERLIGHT_POWEROFF 1 //---------------------------------------------------------------------------------------------------- // Basic Settings //---------------------------------------------------------------------------------------------------- // _C_ means customer //gary 2006.06.15 #define _VIDEO_AUTO_WHITE_BLANCE _FALSE//_ENABLE// #define _FACTORY_MENU_ENABLE _TRUE ///enter the factory menu: first,press the menu key;afterward, input the password 654321 #define _CHINESE_SIMPlIFIED_CHARACTER _TRUE //_FALSE #define _C_NEW_DV_CTRL_ENABLE _DISABLE #undef CONFIG_24C32 //-------------------------------------------------- // Scaler Type //-------------------------------------------------- //-------------------------------------------------- //Customer Fuction CZL 071019 //--------------------------------------------------- #define _CUSTOMER_HPC _OFF #define _CUSTOMER_SVA _OFF #define _CUSTOMER_CGT _OFF #define _CUSTOMER_SANSE _OFF #define _CUSTOMER_KTC _OFF //20081027 ccy add #define _CUSTOMER_TOLIP _ON #define _CUSTOMER_HUANA _ON //dong add 20091214 //-------------------------------------------------- // Facturn mode //-------------------------------------------------- #define _RTD2323_DEBUG_MESSAGE _ON //-------------------------------------------------- // Reset Type //-------------------------------------------------- /* #define _RESET_IN 0 // MCU reset Scaler #define _RESET_OUT 1 // Scaler reset MCU */ #define _C_RESET_TYPE _RESET_OUT // Golden Debug Mode //-------------------------------------------------- /* #define _NONE 0 // Disable Golden Mode #define _1024x768_60 1 // 1024 x 768 @ 60Hz #define _1280x1024_60 2 // 1280 x 1024 @ 60Hz */ #define _C_GOLDEN_MODE _NONE//_NONE //-------------------------------------------------- // MCU Type //-------------------------------------------------- /* #define _WINDBOND_W78E65 0 // If using kingmice, please select this option #define _MYSON_MTV312 1 #define _MYSON_MTV512 2 #define _WELTREND_WT61P4 3 #define _WINDBOND_W79E632 4 */ #define _2156R_QA 0 #if 0//_2156R_QA//eric 0608 #define _C_MCU_TYPE _MYSON_MTV512 #else #define _C_MCU_TYPE _REALTEK_RTD2662_EMCU//_WINDBOND_W79E632 #endif /* // Rs232 #undef CONFIG_RS232_9600 #define CONFIG_RS232_19200 #undef CONFIG_RS232_38400 #ifdef CONFIG_RS232_9600 #define _BaudRate 9600 #elif (defined(CONFIG_RS232_19200)) #define _BaudRate 19200 #elif (defined(CONFIG_RS232_38400)) #define _BaudRate 38400 #else #define _BaudRate 9600 #endif */ #define _C_BaudRate CONFIG_RS232_9600//CONFIG_RS232_19200 //-------------------------------------------------- // Panel Type //-------------------------------------------------- /* //-------------------------------------------------- // Panel Type //-------------------------------------------------- #define _AUO_LVDS_22_WXGA 0 //eric 20070524 AU22 #define _AU_RSDS_17 1 #define _AU_LVDS_15 2 #define _AU_LVDS_20_WSXGA 3 #define _AU_LVDS_20_UXGA 4 #define _CPT_CMO_TTL_20 5 #define _AU_LVDS_26 6 #define _LC171W03 7 #define _CMO_M190A1_19 8 #define _CMO_V270B1_27 9 #define _HANNSTAR_M1905_19 10 #define _AUO_M230UW01_23 11 #define _AU_TTL_20_V4 12 #define _SAMSUNG_LVDS_19_WXGA 13 #define _SUMSANG_LTA320W2_L01 15 #define _CMO_LVDS_19_WIDE 16 #define _CMO_LVDS_17 17 #define _AU_LVDS_24W 18 //1920*1200 #define _HSD_190ME13 19 #define _AU_LVDS_T315XW01 20 #define _SHARP_LVDS_LQ150 21 //hua han demo #define _SAMSUNG_LTM190M2L31 22 #define _LVDS_1280X800 23 #define _AU_M190PW01 24 #define _CMO_M260J1_WUXGA 25 //1920X1200 WUXGA */ //#ifdef DERUN_805_AT080 TUOBU_AT090 //#define _C_PANEL_TYPE _LQ110Y3DG01//_HSD100IFW1//_LQ104V1DG52//_SHARP_LVDS_LQ150//_SAMSUNG_LVDS_19_WXGA//_SVA_LVDS_19_WXGA//_CMO_LVDS_17//_AUO_LVDS_22_WXGA//_CMO_M260J1_WUXGA//_CMO_LVDS_17//_M220Z1_03_WXGA//_CMO_M260J1_WUXGA// //#else //#define _C_PANEL_TYPE _HSD100IFW1 //#endif /* #if((_PANEL_TYPE == _CMO_LVDS_17) ||(_PANEL_TYPE == _HANNSTAR_M1905_19)) #define _DISP_WID 1280 #define _DISP_LEN 1024 #elif (_PANEL_TYPE == _LC171W03) #define _DISP_WID 1280 #define _DISP_LEN 768 #elif (_PANEL_TYPE == _AU_LVDS_26) #define _DISP_WID 1366 #define _DISP_LEN 768 #elif (_PANEL_TYPE == _CPT_CMO_TTL_20) #define _DISP_WID 640 #define _DISP_LEN 480 #elif (_PANEL_TYPE == _CMO_M190A1_19) #define _DISP_WID 1440 #define _DISP_LEN 900 #elif (_PANEL_TYPE == _CMO_V270B1_27) #define _DISP_WID 1366 #define _DISP_LEN 768 #endif */ //-------------------------------------------------- // Tuner Type //-------------------------------------------------- /* #define _PHILIPS_1236 0 #define _PHILIPS_1216 1 #define _XUGUANG 2 #define _SONY_PB466Z 3 #define _XUGUANG_JS6H1 4 #define _XUGUANG_JS6BM131F2 5 #define _THOMSON_8640B 6 #define _LG_H064F 7 #define _XUGUANG_TDQ6PD 8 #define _JS6H1_111 9 #define _GDC8F2D_106L 10 //PAL/SECAM, 38.9MHz #define _GDC8F2E_106L 11 //PAL/NTSC, 38MHz #define _TCL_M27WTS2DI 12 //PAL, adc, 38.9MHz #define _ET5C511_TDA9886ST 14 //JPE using, also apply to XF-6A, JVJ #define _ET6T1E_TDA9886ST 15 //Premier using: GDC ET_6T1E #define _GDC8F1D_QF106L 16 //PAL/SECAM, 38.9 #define _TUNER_NONE 17 // */ #define _C_TUNER_TYPE _ET6T1E_TDA9886ST//_GDC8F2D_106L//_GDC8F1D_QF106L//_TUNER_NONE//_GDC8F2E_106L// #define _TVSYSTEM_PAL_ONLY 0 #define _TVSYSTEM_NTSC_ONLY 1 #define _TYPEOF_TVSYSTEM _TVSYSTEM_PAL_ONLY /* //-------------------------------------------------- //Nonlinear scale up method //-------------------------------------------------- #define _ROOF 0 #define _BOUL 1 */ #define _C_NONLINEAR_SCALEUP_METHOD _ROOF //-------------------------------------------------- // Remote Control //-------------------------------------------------- /* #define _NEC_TYPE 0 #define _PANASONIC_TYPE 1 #define _SONY_TYPE 2 */ #define _C_REMOTE_CONTROL _NEC_TYPE//_PANASONIC_TYPE #define _TYPE1 0 #define _TYPE2 1 #define _TYPE_7005L_TD 2 #define _TYPE_PREMIER 3 //demo for rongdian #define _TYPE_SVA_TRC028 4 #define _TYPE_HPC2 5 #define _TYPE_JPE 6 #define _TYPE_SANSE 7 //san se, alike _TYPE_PREMIER #define _TYPE_CGT 8 //codegen tech. #define _TYPE_TOLIP 9 // 20080823 for tolip #define _TYPE_KONSTA 10 #define _TYPE_YINGKA_BLACK 11 #define _TYPE_YINGKA_WHITE 12 #define _TYPE_YINGKA_THIN 13 #define _TYPE_YINGKA_GRAY 14 #define _TYPE_YINGKA_XBW 15 #define _TYPE_YINGKA_HUANA 16 #define _TYPE_INCAR_ALL 17 #define _TYPE_INCAR_BAOLIXIN721 18 #ifdef TUOBU_AT090 #define _REMOTE_CONTROLLER _TYPE_YINGKA_BLACK//_TYPE_YINGKA_HUANA//_TYPE_YINGKA_XBW//_TYPE_YINGKA_BLACK//_TYPE_YINGKA_HUANA// #elif defined(HUANA_100IFW1_1081)||defined(HUANA_AT090)||defined(HUANA_AT090_768KEY) #define _REMOTE_CONTROLLER _TYPE_YINGKA_HUANA #elif defined(XIAOBAWANG_AT090) ||defined(XIAOBAWANG_101PFW2B00) #define _REMOTE_CONTROLLER _TYPE_YINGKA_XBW #elif defined(GUANWEI_AT090_902) #define _REMOTE_CONTROLLER _TYPE_INCAR_BAOLIXIN721 //222 #else #define _REMOTE_CONTROLLER _TYPE_INCAR_ALL//_TYPE_YINGKA_BLACK//_TYPE_YINGKA_HUANA//_TYPE_YINGKA_XBW//_TYPE_YINGKA_BLACK//_TYPE_YINGKA_HUANA// #endif //-------------------------------------------------- // Key type //-------------------------------------------------- #define _TYPE_KEY_BC 0 #define _TYPE_KEY_BF 1 #define _TYPE_KEY_DERUN1002 2 #define _TYPE_KEY_HS1081 3 #define _TYPE_KEY_HS1081_2 4 #define _TYPE_KEY_BB 5 #define _TYPE_KEY_XBW 6 #define _TYPE_KEY_INCARALL 7 #define _KEY_TYPE _TYPE_KEY_INCARALL//_TYPE_KEY_BB//_TYPE_KEY_BC//_TYPE_KEY_BF//_TYPE_KEY_DERUN1002//_TYPE_KEY_BB//_TYPE_KEY_HS1081_2//_TYPE_KEY_HS1081//_TYPE_KEY_XBW// //-------------------------------------------------- // Color Preference //-------------------------------------------------- /* #define _REALTEK_STYLE 0 #define _PANASONIC_STYLE 1 */ #define _C_COLOR_PREFERENCE _PANASONIC_STYLE //-------------------------------------------------- // VGA/DVI Information(H-Width/V-Height/V-Freq) //-------------------------------------------------- /* #define _SYNC_TYPE 0 #define _TABLE_TYPE 1 */ #define _C_TIMING_INFO_TYPE _SYNC_TYPE//_TABLE_TYPE //-------------------------------------------------- // VDC Type //-------------------------------------------------- /* #define _RTD2612 0 #define _RTD2613 1 */ #define _C_VDC_TYPE _RTD2613 //-------------------------------------------------- // Auto Scan Type //-------------------------------------------------- /* #define _TABLE_WEIGHT_SCAN 0 #define _SEQUENTIAL_SCAN 1 */ #define _C_SCAN_TYPE _SEQUENTIAL_SCAN//_TABLE_WEIGHT_SCAN //-------------------------------------------------- // Signal Mode Type //-------------------------------------------------- #define _C_SIG_MODE_TYPE _SIG_MODE_PAL //(refer to global.h) //-------------------------------------------------- // Definations of Host Interface (Parallel/Serial Port) //-------------------------------------------------- /* #define _SERIAL_PORT 0 #define _PARALLEL_PORT 1 */ #define _C_HOST_INTERFACE _SERIAL_PORT //-------------------------------------------------- // Definations of RTD/MCU Crystal Frequency in KHz //-------------------------------------------------- /* #define _XTAL12000K 12000 #define _XTAL24576K 24576 // If using kingmice, please select this option #define _XTAL24000K 24000 #define _XTAL40000K 40000 #define _XTAL27000K 27000 */ #define _C_RTD_XTAL _XTAL27000K //_XTAL24000K //_XTAL24576K #if(1/*_C_MCU_TYPE == _REALTEK_RTD2662_EMCU*/) #define _C_MCU_XTAL _XTAL24300K //_XTAL24576K #else #define _C_MCU_XTAL _XTAL24000K //_XTAL24576K #endif //-------------------------------------------------- // Definitions for First DHS Masking //-------------------------------------------------- #define _C_DHS_MASK (_DISABLE << 7) //-------------------------------------------------- // Definitions for Display Signal //-------------------------------------------------- #define _C_DVS_INVERT (_DISABLE << 2) #define _C_DHS_INVERT (_DISABLE << 1) #define _C_DEN_INVERT (_DISABLE) #define _C_DISPLAY_INVERT (_DVS_INVERT | _DHS_INVERT | _DEN_INVERT) //-------------------------------------------------- // Definitions for Display Control //-------------------------------------------------- #define _C_DISPLAY_CTRL (_DHS_MASK | _DISPLAY_INVERT) //-------------------------------------------------- // TMDS Supported //-------------------------------------------------- #define _C_TMDS_SUPPORT _ON //---------------------------------------------------------------------------------------------------- // Advance Settings //---------------------------------------------------------------------------------------------------- //---------------------------------------------------------------------------------------------------- // GAMMA TYPE Settings //---------------------------------------------------------------------------------------------------- //-------------------------------------------------- // Definitions of Gamma Table Type //-------------------------------------------------- /* #define _COMPACT_GAMMA_NORMAL_TABLE 0 #define _FULL_GAMMA_NORMAL_TABLE 1 #define _COMPACT_GAMMA_COMPRESS_TABLE 2 #define _FULL_GAMMA_COMPRESS_TABLE 3 #define _FULL_GAMMA_COMPRESS_TABLE2 4 */ #define _C_GAMMA_TYPE _FULL_GAMMA_NORMAL_TABLE//_FULL_GAMMA_COMPRESS_TABLE2 //-------------------------------------------------- // Support Timing //-------------------------------------------------- /*#define _C_H_FREQ_MAX 1100 // Unit in 0.1 kHZ #define _C_H_FREQ_MIN 100 // Unit in 0.1 kHZ #if _PANEL_TYPE==_CMO_M260J1_WUXGA #define _C_V_FREQ_MAX 650//780 // Unit in 0.1 HZ #else #define _C_V_FREQ_MAX 1300//780 // Unit in 0.1 HZ #endif #define _C_V_FREQ_MIN 20//490 // Unit in 0.1 HZ */ //-------------------------------------------------- // Turn on this function to lock in the +-2MHz range //-------------------------------------------------- #define _C_AFC_TRACKING _DISABLE //-------------------------------------------------- // Definitions of Nonlinear Scaling //-------------------------------------------------- #define _C_NONLINEAR_SCALING _DISABLE//_ENABLE //-------------------------------------------------- // Definitions of APLL1 M/N Code //-------------------------------------------------- #define _C_APLL1_M_CODE 25 #define _C_APLL1_N_CODE 2 //-------------------------------------------------- // Definitions of DDS P Code //-------------------------------------------------- #define _C_DDS_P_CODE 23 //-------------------------------------------------- // Definitions of APLL Fast Lock //-------------------------------------------------- #define _C_APLL_FAST_LOCK _ON //-------------------------------------------------- // Definitions of DPLL N Code //-------------------------------------------------- #define _C_M2PLL_USE _OFF #define _C_M2PLL_XTAL _XTAL12000K #define _C_RTD_M2PLL_RATIO (_RTD_XTAL / _M2PLL_XTAL) //-------------------------------------------------- // Definitions of ADC Fine Tune Delay (Value == 0 ~ 7) //-------------------------------------------------- #define _C_ADC_FINE_TUNE_DELAY_RED 0 #define _C_ADC_FINE_TUNE_DELAY_GREEN 0 #define _C_ADC_FINE_TUNE_DELAY_BLUE 0 //-------------------------------------------------- // Definitions of ADC0 Input Swap Settings //-------------------------------------------------- #if 0//(_PCB_TYPE ==_RTD2662_MONITOR_QA_PCB) #define _C_ADC0_INPUT_SWAP_RG _OFF #define _C_ADC0_INPUT_SWAP_RB _OFF #define _C_ADC0_INPUT_SWAP_GB _OFF #else//(_PCB_TYPE ==_RTD2662_LCDTV_DEMO_PCB) #define _C_ADC0_INPUT_SWAP_RG _OFF #define _C_ADC0_INPUT_SWAP_RB _OFF #define _C_ADC0_INPUT_SWAP_GB _OFF #endif //-------------------------------------------------- // Definitions of ADC1 Input Swap Settings //-------------------------------------------------- #if 0//(_PCB_TYPE ==_RTD2662_MONITOR_QA_PCB) #define _C_ADC1_INPUT_SWAP_RG _OFF #define _C_ADC1_INPUT_SWAP_RB _OFF #define _C_ADC1_INPUT_SWAP_GB _OFF #else//(_PCB_TYPE ==_RTD2662_LCDTV_DEMO_PCB) #define _C_ADC1_INPUT_SWAP_RG _OFF #define _C_ADC1_INPUT_SWAP_RB _OFF #define _C_ADC1_INPUT_SWAP_GB _ON #endif //-------------------------------------------------- // DVI Long Cable Supported //-------------------------------------------------- #define _C_DVI_LONG_CABLE_SUPPORT _OFF//_ON //-------------------------------------------------- // DVI-I Source Switch (VGA/DVI) Supported //-------------------------------------------------- #define _C_DVI_I_SOURCE_SWITCH_SUPPORT _OFF //-------------------------------------------------- // VGA/DVI Auto Switch (VGA/DVI) Supported //-------------------------------------------------- #define _C_VGA_DVI_AUTO_SWITCH_SUPPORT _FALSE //-------------------------------------------------- // HDCP Supported //-------------------------------------------------- #define _C_HDCP_SUPPORT _OFF//_ON //-------------------------------------------------- //Aspect ratio //-------------------------------------------------- #define _C_DISPLAY_RATIO_ENABLE _ON //-------------------------------------------------- // Video Supported //-------------------------------------------------- #define _C_VIDEO_SUPPORT _ON//_OFF //-------------------------------------------------- // Peaking Filter and Coring Control Supported //-------------------------------------------------- #define _C_PEAKING_CORING_SUPPORT _OFF //-------------------------------------------------- // YPbPr Supported //-------------------------------------------------- #define _C_YPBPR_SUPPORT _ON //#endif //-------------------------------------------------- // YPbPr Sync Source //-------------------------------------------------- //#define _SOG0 0 //#define _SOG1 1 #define _C_YPBPR_SYNC_SOURCE _SOG1 //-------------------------------------------------- // YPbPr New Sync Detected //-------------------------------------------------- #define _C_YPBPR_NEW_SYNC_DETECT _ON//_OFF //-------------------------------------------------- // YPbPr Supported //-------------------------------------------------- #define _C_DVI_DE_ONLY_SUPPORT _OFF//_ON//_OFF //-------------------------------------------------- // Set Different Display Information by Mode //-------------------------------------------------- #define _C_DISP_INFO_BY_MODE _OFF //-------------------------------------------------- // Set DClk Spread Spectrum Range //-------------------------------------------------- #define _C_DCLK_SPREAD_RANGE 0 //0~15, 0¡÷disable, 15¡÷7.5% //-------------------------------------------------- // Set Last Line Finetune Method //-------------------------------------------------- /* #define _LAST_LINE_METHOD_NONE 0 #define _LAST_LINE_METHOD_0 1 // Formula: Tne DEN End to DEN Start Length must be (1280*N) #define _LAST_LINE_METHOD_1 2 // Formula: Tne DEN End to DEN Start Length must be (4096*N + 128) #define _LAST_LINE_METHOD_2 3 // Formula: Last line limit */ #define _C_LAST_LINE_FINETUNE _LAST_LINE_METHOD_NONE// _LAST_LINE_METHOD_2// #define _LAST_LINE_TARGET 1//1160 // For //-------------------------------------------------- // Set Adjusting Vertical Position Direction Method //-------------------------------------------------- /* #define _V_POSITION_METHOD_0 0 #define _V_POSITION_METHOD_1 1 */ #define _C_V_POSITION_DIRECTION _V_POSITION_METHOD_0 //-------------------------------------------------- // RTD2553V Set Method of Hsync Type Detection for Analog Input //-------------------------------------------------- /* #define _NORMAL_RUN 0 #define _AUTO_RUN 1 */ #define _C_HSYNC_TYPE_DETECTION _AUTO_RUN #define _C_LD_OPTION _DISABLE //-------------------------------------------------- // RTD2610 SECAM Color Identify //-------------------------------------------------- #define _C_SECAM_DETECT _DISABLE //-------------------------------------------------- // TV Auto Scan type //-------------------------------------------------- #define AUTO_SCAN_TAIWAN 0 #define AUTO_SCAN_NORTHAMERICA 1 #define TV_AUTOSCAN_TYPE AUTO_SCAN_TAIWAN//AUTO_SCAN_NORTHAMERICA //leo 20060612 add tv source no signal background option //-------------------------------------------------- // Set TV Nosignal Background //-------------------------------------------------- /* #define _BLACK_BACKGROUND 0 #define _BLUE_BACKGROUND 1 #define _SNOW_BACKGROUND 2 */ #define _C_TV_NOSIGNAL_BACKGROUND _BLUE_BACKGROUND //leo 20060626 add osd to show mts at channel number #define _SHOW_MTS_INFO _ENABLE //leo 20060613 add black level option #define _C_BLACK_LEVEL _ENABLE //-------------------------------------------------- // TV change channel whether force to enable background color //-------------------------------------------------- #define _TV_BACKGROUND_COLOR _DISABLE //--------------------------------------------------------- // Sharpness table // Panel resolution >1024x768 use table 1 // Panel resolution <1024x768 use table 2 //--------------------------------------------------------- #define SharpnessNoneTable 0 #define SharpnessTable1 1 #define SharpnessTable2 2 #define _Peaking_Coring_Table SharpnessTable2 //------------------------------------------------------- // sRGB Color Enhance // used sRGB to enhance Color //------------------------------------------------------- #define sRGB_Color_Enhance _ENABLE //------------------------------------------------------- // Change Source Type //------------------------------------------------------- #define Change_SOURCE_Type1 0 // directly to change source #define Change_SOURCE_Type2 1 // SRC key:start source menu, or close source menu // left/right/enter key confirm, or disable menu after 5sec. #define Change_SOURCE_Type3 2 // SRC key: start source menu, and select source menu // left/right key confirm, or confirmed after 2sec. //20080829 ccy modify #define _Change_SOURCE_Type Change_SOURCE_Type1//Change_SOURCE_Type3// Change_SOURCE_Type3// Change_SOURCE_Type2 //------------------------------------------------------- // Auto Scan Done Back to First Channel //------------------------------------------------------- #define _AutoScanDoneSetToFirstChannel _FALSE //------------------------------------------------------- // DVI Supported //------------------------------------------------------- #define _C_DVI_SUPPORT _DISABLE//_DISABLE// //------------------------------------------------------- // AV Output //------------------------------------------------------- #define _C_AV_OUT _ENABLE //------------------------------------------------------- // AdjustCustomerColorMode //------------------------------------------------------- #define _C_AdjustCustomerColorMode _DISABLE //731301*** //-------------------------------------------------- // Audio Output Type of HDMI //-------------------------------------------------- //#define _I2S 0 //#define _SPDIF 1 #define _C_HDMI_AUDIO_OUTPUT_TYPE _I2S //731301### //741001*** //-------------------------------------------------- // HDMI HOT PLUG OPTION //-------------------------------------------------- #define _C_HDMI_HOT_PLUG_OPTION _DISABLE //741001### //-------------------------------------------------- //Font Type of Simple Chinese //-------------------------------------------------- #define _C_2FONT_CHS 0 #define _C_1FONT_CHS 1 #define _C_FONT_CHS_TYPE _C_2FONT_CHS /*//------------------------------------------------------- //Ir Handler Mode //------------------------------------------------------- #define _SW_MODE 0 #define _HW_MODE 1 #if _RTD2662_LCDTV_DEMO_PCB2//(_C_PCB_TYPE)// == _RTD2662_LCDTV_DEMO_PCB2 #define _IR_HANDLER_MODE _HW_MODE #else #define _IR_HANDLER_MODE _SW_MODE #endif */ //tommy define for no signal auto powerstandby //The time must 0